aluminum electrolytic capacitors (smd type) surface mount type series: fp type: v high temperature lead-free reflow (suffix : a?) endurance105 2000 h low esr (30 % to 50 % less than fk series) vibration-proof product (30g guaranteed) is available upon request6.3 Q rohs compliant example : 6.3 v.dc 22 f marking color : black unitmm ?the dimensions of the vibration-proof products, please refer to the page of the mounting specification. 3 (impedance ratio at 120 hz) 1 k 10 k 100 k to freq.hz) 0.65 0.85 0.95 1.00 25 35 4 4 4 3 3 3 3 3 3 3 stabilized at +20 , capacitors shall meet the following l imits. capacitance change dissipation factor (tan ) please see the attached characteristics list capacitance range 10 f to 1800 f 2 2 2 2 3 10 16 50 features specifications category temp. range C55 to +105 shelf life after storage for 1000 hours at +105 2 with no voltage applied and th en being (with voltage treatment) rated voltage range 6.3 v.dc to 50 v.dc characteristics at low temperature rated voltage (v.dc) z (C25 ) / z (+20 ) z (C40 ) / z (+20 ) z (C55 ) / z (+20 ) 6.3 2 2 capacitance tolerance 20 % (120 hz / +20 ) leakage current i Q 0.01 cv or 3 (a) after 2 minutes (whichever is greater) within the initial limit endurance after applying rated working voltage for 2000 hours at +105 2 and the n being within 30 % of the initial value dissipation factortan ) Q 200 % of the initial limit leakage current 7.8 max. d 6.3 5.80.3 6.6 7.8 max. ab h size code d l 2.6 2.6 0.650.1 d8 6.3 7.70.3 6.6 1.8 0.35 resistance to soldering heat after reflow soldering and then being stabilized at +20 , capacitors shall meet the capacitance change within 10 % of the initial value dissipation factortan ) within the initial limit leakage current within the initial limit marking 10 to 470 560 to 1800 dimensions 0.70 aec-q200 aec-q200 compliant cap.f 120 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. should a safety concern arise regarding this product, please be su re to contact us immediately. 17-apr-19 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 g 10.0 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 c 16 h 0.35 +0.15 50 `0.20 f 8.0 10.20.3 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 e 8.0 0.700.2 +0.15 `0.20 0.650.1 1.8 0.35 +0.15 `0.20 0.35 0.35 +0.15 `0.20 +0.15 `0.20 4.3 5.5 max. 1.8 0.650.1 1.0 5.3 6.5 max. 2.2 0.90 0.95 1.00 p stabilized at +20 , capacitors shall meet the limits specifi ed in endurance. following limits. frequency correction factor for ripple current j 6.3 a 10 e 25 v 35 0.650.1 5.0 5.80.3 r.voltage code b c 4.0 5.80.3 unitv.dc i w k 1.5 0.3 max. d 0.5 l h a 0.2 b 0.2 w i p i 22 j fp k negative polarity marking ( C) capacitance ( f) series identification rated voltage code lot number mark for lead - free products (black dot) pressure relief (10 and larger) reference size downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |